MonoWare Change Log

------------------------------------------------------------------------------------
MonoWare 0.1.030 Revision Log (Release date: Jan 5, 2018)
[Feature]
- Add a global base
[Changes]
-
[Bug fix]
- Fixed wrong AABB boundaries when copying multiple objects
- Fixed slow selection if the model has many supports
- Fixed an immediate start of printing when 'homing' selected at starting printing
------------------------------------------------------------------------------------
MonoWare 0.1.029 Revision Log (Release date: Dec 29, 2017)
[Feature]

[Changes]
- Remembers the maximized state of the window for next launch
[Bug fix]
- Fixed wrong exposure calculation for variable slicing
- Fixed printing pause/restart issue
- Fixed resolution mismatch between the grayscale mask and actual slices
------------------------------------------------------------------------------------
MonoWare 0.1.028 Revision Log (Release date: Dec 20, 2017)
[Feature]

[Changes]
- Build volume graphics and background changed (Build platform model removed)
[Bug fix]
- STL output bug fix
- Grayscale mask read error when starting
- Support edit mode fixed
------------------------------------------------------------------------------------
MonoWare 0.1.027 Revision Log (Release date: Dec 5, 2017)
[Feature]
- Vertical/horizontal mirror added
[Changes]
- manifest.xml file is added into CWS export
- Enhanced slicing speed (mTex: 2.5->1.5)
[Bug fix]
- Changed the algorithm of waterline display and stabilized its performance
- Wrong scene file information after deleting bases
------------------------------------------------------------------------------------
MonoWare 0.1.026 Revision Log (Release date: Nov 27, 2017)
[Feature]
-
[Changes]
- Pixel dimming exclusion applies to both bottom and top layers
[Bug fix]
- CWS formatting fixed and the first STL file is included in CWS file
------------------------------------------------------------------------------------
MonoWare 0.1.025 Revision Log (Release date: Nov 21, 2017)
[Feature]
- Can select one setting file at start
[Changes]
[Bug fix]
- Error checking while loading recipes
- Error checking for compensation image and enable (grayscale)
------------------------------------------------------------------------------------
MonoWare 0.1.024 Revision Log (Release date: Nov 21, 2017)
[Bug fix]
- Walk around for intel hd graphics opengl crashes during support generation

------------------------------------------------------------------------------------
MonoWare 0.1.023 Revision Log (Release date: Nov 18, 2017)
[Feature]
- Checkbox to list objects only without supports and base
- Show/hide models and attached supports
[Changes]
-
[Bug fix]
- Fixed license udpate on start

------------------------------------------------------------------------------------
MonoWare 0.1.022 Revision Log (Release date: Nov 17, 2017)
[Feature]
- Selective change of support tips and diameter
[Changes]
-
[Bug fix]
- Projector exposure multiplier (PEM) not updated

------------------------------------------------------------------------------------
MonoWare 0.1.021 Revision Log (Release date: Nov 10, 2017)
[Feature]
- X-ray view added
- Supports under selected models can be selectively removed
- Loaded scene information is added into existing models
- CWS (Zip) file format export
[Changes]
- Rendering changed
[Bug fix]
- Fixed occastional no support generation
- Fixed and stabilized support adjustment after model movement

------------------------------------------------------------------------------------
MonoWare 0.1.020 Revision Log (Release date: Oct 20, 2017)
========= Firmware: mono1mk2v06 =====================================
[Feature]
- Waterline during support placement
- Support: Thin tip can be toggled
- Support: Contact diameter and thiness adjusted to all existing supports
[Changes]
- Display print settings when pushing the start button
- Light intensity compensation: data format change during save/load
[Bug fix]
- Improve reliability picking mouse point
- Incorrect slicing height with low resolution monitor
- Improve the model movement using a mouse
- Changed build platform file is saved/loaded
[Known bugs]
-
------------------------------------------------------------------------------------
MonoWare 0.1.019 Revision Log (Release date: Oct 6, 2017)
========= Firmware: mono1mk2v06 =====================================
[Feature]
-
[Changes]
- Remove rarely used buttons
[Bug fix]
- Incorrect recipe load/save
- Incorrect printing timer
[Known bugs]
-
------------------------------------------------------------------------------------
MonoWare 0.1.018 Revision Log (Release date: Sept 26, 2017)
[Feature]
- Record the last file location
[Changes]
- Added a warning if you start with display device 0
[Bug fix]
- Wrong vertical lift distance due to timer setting (Critical)
- Wrong link to parent models in case of model deletion
- Inaccurate z-axis position after restarting
- Loss of last couple of layers during slicing
[Known bugs]

------------------------------------------------------------------------------------
MonoWare 0.1.017 Revision Log (Release date: Sept 18, 2017)
[Feature]
- Three different mode for Motor X (Mixer, Wiper, Tilt)
[Changes]
- Multiple selection and remove/copy the selection
- Align the multiple selection (Full version only)
[Bug fix]
- Fixed recipe save/load routines
- Grbl: Fixed going back to zero position after printing completion if motor limit is set to 0
[Known bugs]
- Estimate time accuracy

------------------------------------------------------------------------------------
MonoWare 0.1.016 Revision Log (Release date: Sept 7, 2017)
[Feature]
- Variable vertical steps (Full version only)
[Changes]
- Moved sub-menus of raft and hollowing into separate windows
[Bug fix]
- Fixed some bugs related to Hex file upload
[Known bugs]
- Inaccurate estimate printing time

------------------------------------------------------------------------------------
MonoWare 0.1.015 Revision Log (Release date: Sept 4, 2017)
========= Firmware: mono1mk2v04 =====================================
[Feature]

[Changes]
- Removed Grbl 0.8c support
[Bug fix]
- Fixed Grbl 0.8a (LittleRP) related issues
- Fixed Grbl 1.1f related issues (this version is recommended against 0.8a)

------------------------------------------------------------------------------------
MonoWare 0.1.014 Revision Log (Release date: Sept 2, 2017)
[Feature]
- Added barrel distortion correction
- Added illumination non-uniformity correction image generator & option
- Added Marlin support, but some functions are not work yet.
[Changes]
- Printer setting window has multiple tabs; printer, printing, slice
- Some slicing operation on the fly: pixel dimming, anti-aliasing, color channel, grayscale
[Bug fix]
- Changed to circular kernel during hollowing and dimming
- Fixed unstable serial port connection to printer
------------------------------------------------------------------------------------
MonoWare 0.1.013 Revision Log (Release date: -)
========= Firmware: mono1mk2v03 =====================================
[Feature]
- Separate printer setting window
- Support 3 channel motors
[Bug fix]
- Fixed loading STL files under the same folder with MONO file
- Fixed wrong shaped bottom supports when loading MONO file
------------------------------------------------------------------------------------
MonoWare 0.1.012 Revision Log (Release: Aug 05, 2017)
[Feature]
- Add log file under ./MonoWare/debug.log
- Enable drag and drop of files
[Bug fix]
- Fix OpenGL version issue: OpenGL 3.0 or higher version is needed
- Limit support bottom radius on meshes
------------------------------------------------------------------------------------
MonoWare 0.1.011 Revision Log
[Feature]
- Selected color channel display (Red, Green, Blue)
[Bug fix]
- Wrong slice count after loading scene or model with existing slice images
- Windows 10 crashing on start is fixed
------------------------------------------------------------------------------------
MonoWare 0.1.010 Revision Log
[Feature]
- Support contact size increase (E key) or decrease (W key) during support placement
- Support flip copy x, y, or x and y with guide planes
- Pixel dimming
- Grbl firmware supports (0.8a, 0.8c, 1.1)
[Bug fix]
-
[Changes]
- Bottom grid pitch = 3 mm
[Known bugs]
- Windows 10 crash during start when a mouse pointer is on the 3D view area
-> Place the shortcut icon around corners and start the program there.
- Grbl0.8a : After changing the screw pitch, the reference position changes.
------------------------------------------------------------------------------------
MonoWare 0.1.009 Revision Log
[Feature]
- Two tone surface normal colors to help determine right support placement
- Display resolution override function for off-printer slicing
[Bug fix]
- Wrong model magnification other than 1920 x 1080
- Save/load base plate
[Changes]
- Removed buttons for shutter open/close
------------------------------------------------------------------------------------
MonoWare 0.1.008 Revision Log
[Feature]
- All support points can be moved horizontally (Use this at zoomed in view)
[Bug fix]
- Wrong slice area after chaning the pixel size or build area
- Wrong mouse point location during slice preview
- Wrong mouse point location during support contact view only mode
[Changes]

------------------------------------------------------------------------------------
MonoWare 0.1.007 Revision Log
- Added support view option: full support vs. contact only draw (Key shortcut: V)
- Added a feature for adjusting support contact point and size (Shift + Rightbutton)
- Bug fixed on support generation between short distance
- Bug fixed on support-model link when support removal
- Bug fixed on long support & mesh-support generation
- Disabled the zoom at mouse position as default. Need SHIFT to focus zoom
- Bug fixed on OpenGL version issue.

------------------------------------------------------------------------------------
MonoWare 0.1.006 Revision Log
- Bug fixed on zero stepper screw setting
- Bug fixed on 0.1mm z axis move buttons
- Removed single recipe limit with LITE version
- Bug fixed on support generation from support to normal meshes
- Added firmware version check button
- Firmware version change: mk2v02